Looking for a Tig welding solution but confused about which one to buy ?
Here's What we do
Speedup your TIG Process up to 10X faster with SigmaWeld Accelerated TIG (S.W.A.T)
50 YEARS OF INDUSTRY EXPERIENCE !!
Fill in the form below to get in touch with us
Did you know that 97% of businesses suffer from these 7 TIG Welding problems
- On an Average 25% of Productive welding time is lost due to regular start/stop during TIG Welding, resulting in lost revenue due to fewer hours worked.click here
- On average every business owner incurs a direct revenue loss of lacs every year due to Stub-end losses.click here
- Over 70% of the jobs after doing TIG Welding require grinding due to overlaps and ultimately adding more cost and time to the project.click here
- Increased no of passes due to Low deposition rate of TIG Welding process can lead to loss of welding time up to 40% and incur losses in lacs.click here
- Due to regular start/stop of Pre flow & Post flow argon gas average business owners incur loss of lacs on gas consumption.click here
- Hours of time were wasted in Edge preparation & cleaning of the weld pass which resulted in direct lost revenue due to fewer hours worked.click here
- high heat input can lead to distortion of the plates and it results in rejection of the job or gouging and re-welding the same joint.click here
If you are facing any of these problems. please fill out the form and our technical team will get in touch with you
Why Choose Sigmaweld Accelerated TIG (S.W.A.T)
- 90% reduction in filler metal consumption
- 83% reduction in no of passes
- No edge preparation required -100% reduction in weld edge preparation time
- 60% reduction in gas consumption
- 83% reduction in cleaning time
- 70-75% reduction in total welding cost
- 30-40% reduction in Heat input
- Industries We Serve
- Defence & Aerospace
- Cryogenic Vessel
- Tank & Vessel
- Food, Pharma& Dairy Equipment
- Nuclear
- Tube Mills
- S.W.A.T Applications
- Long Seam Welding
- Circular Seam Welding
- Tube mills
- Single Torch ( upto 8.5mm)
- No Plasma,No Oscillators.No Wire Feeding
Depth of Penetration
Long Seam
Cryogenic Tank Welding
Cryogenic Tank Welding
Tube Mills
HASTELLOY C276 Welding
comparison of S.W.A.T with existing GTAW Process
Data Calculated for 1m of joint
Austenitic SS - 10mm plate comparison
| Existing GATW | S.W.A.T | Saving% | |
|---|---|---|---|
| No of passes | 6 | 1 | 83% |
| Filler metal/meter | 1000g | 100g | 90% |
| Weld pass clean | 60min | 10min | 83% |
| Shielding & purging gas | 1800Itr | 700Itr | 60% |
| Total Cost /mtr | 70-75% |
Comparatively low H.I. helps to achieve require impact
| Welding Current | 100-200A | 500-550A | - |
| Welding speed | 80-100mm/min | 400-450mm/min | - |
| Weld Edge Time | X min | Nil | 100% |
We have been trusted by
We also manufacture welding machines of Welding Inverters for ARC, TIG, MIG, SAW Welding applications, Value Added Products like Cold Wire Feeder, Hot Wire Tig Welding solutions, Data Monitoring System and Pre Weld Post Weld Induction heating, Welding SPM’s, HardFacing and Cladding Solutions
Sigma Weld
31, Mistry Industrial Complex,
Cross Road ‘A’, MIDC,
Andheri ( East ), Mumbai – 400093, India